Supermicro 1U Rackmount A+ Server AS-1020C-3B
Key Features:
• Dual AMD® Opteron„¢ Support, (Dual Core Ready)
• Support up to 16GB DDR400 SDRAM (or)
• Up to 32GB DDR333 SDRAM (or)
• Up to 32GB DDR266 SDRAM
• 4 x 3.5" Hot-swap SAS / SATA Drive Trays
• 500W Cold-swap Power Supply
|
Product SKU
| |
|---|---|
| AS-1020C-3 | • A+ Server 1020C-3 (Beige) |
| AS-1020C-3B | • A+ Server 1020C-3B (Black) |
|
Motherboard
| |
|---|---|
| • H8DCR-3 | |
| Processor/Chipset
|
|
|---|---|
| CPU | • Dual 940-pin ZIF Sockets • Supports up to two Dual-Core AMD Opteron„¢ 200 Series processor(s) • Single CPU configurations are not recommended • VRM x3 |
| Chipset | • nVidia nForce Pro 2200 (CK804) • AMD 8132 |
|
System Memory
| |
|---|---|
| Memory Capacity | • Eight 184-pin DIMM sockets • Supports up to 16 GB DDR 400 MHz memory or • Supports up to 32 GB DDR 333 MHz memory or • Supports up to 32 GB DDR 266 MHz memory • Single or Dual (recommended) channel memory support • For Single CPU: Memory must be populated in CPU1 DIMMs only • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks |
| Memory Type | • DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
| DIMM Sizes | • 256 MB, 512 MB, 1GB, 2GB, 4GB** |
| Memory Voltage | • 2.5 V only |
| Error Detection | • Corrects single-bit errors |
|
On-Board Devices
| SAS | • Adaptec AIC-9410W SAS Controller • 8 SAS Ports (4 Internal, 4 External) • RAID 0, 1, 10 • Zero-Channel RAID (optional) |
IPMI | • 1U support: Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI-B) • Remote Management Module • (Card not included) |
|---|---|
| Network Controllers | • Two Broadcom BCM5721 Gigabit LAN / Ethernet Controllers • Supports 10Base-T, 100Base-TX, and 1000Base-T, RJ45 output |
| Graphics | • ATI Rage XL 8MB |
| Super I/O | • Winbond 83627HG |
| Clock Generator |
• ICS8634 |
|
Input/Output
| Serial Attached SCSI |
• Integrated Adaptec AIC-9410W(SAS) Controller • Two Serial Attached SCSI (SAS) ports (1 internal, 1 external) • Each SAS port supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives |
IDE | • Dual EIDE channels support up to four UDMA IDE devices • Supports UDMA Mode 5 • Supports PIO Mode 4 • Supports ATA 100/133 |
Floppy | • 1 Floppy port, 1.44 MB |
|---|---|
| LAN | • 2 RJ45 LAN ports |
| USB | • FUCI • Up to 4 USB Ports 2.0 Compliant, 1.1 Compatible • 2 Rear Ports • 2 Internal Headers |
| VGA | • 1 VGA port |
| Keyboard/Mouse | • PS/2 keyboard and mouse ports |
| Serial Ports |
• 1 Fast UART 16550 serial port • 1 header |
|
Chassis
| |
|---|---|
| Form Factor | • 1U Rackmount |
| Model | • SC813TQ+-500 |
|
Dimension and Weight
| |
|---|---|
| Height | • 1.7" (43mm) |
| Width | • 17.2" (437mm) |
| Depth | • 25.6" (650mm) |
| Gross Weight | • 38 lbs (17.2kg) |
| Available Colors | • Beige, Black |
|
Front Panel
| |
|---|---|
| Buttons | • Power On/Off button |
| LEDs |
• Power LED |
|
Drive Bays
| |
|---|---|
| Hot-swap | • 4 x 3.5" hot-swap SCSI Drive Bays with SAF-TE |
|
Peripheral Drives
| |
|---|---|
| Floppy | • 3.5" 1.44MB Slim Floppy Drive |
| CD-ROM |
• Slim 24x CD-ROM drive |
|
Expansion Slots
| |
|---|---|
| Full-height / Half-length Slot |
• 64-bit 133MHz PCI-X (riser card pre-preinstalled) OR |
| Low-profile / Half-length Slot |
• 64-bit 100MHz PCI-X (riser card pre-installed) OR |
|
SAS Backplane
| |
|---|---|
• 4 x 3.5" SAS HDD Backplane |
|
|
System Cooling
| |
|---|---|
| Fans | • 4x 10,200 RPM counter rotating fans |
|
Power Supply
| |
|---|---|
| Cold-swappable 500W AC power supply module with PFC [ 20-pin, (4-pin, 8-pin = 12V) ] | |
| AC Voltage | • 100 - 240V, 60-50Hz, 10 Amp Max |
| DC Output |
• 5V + 3.3V ‰¤ 160W |
| +5V | • 30.0 Amp |
| +5V standby | • 2.0 Amp |
| +12V | • 39.0 Amp |
| -12V | • 1.0 Amp |
| +3.3V | • 21.0 Amp |
|
System BIOS
| |
|---|---|
| BIOS Type |
•
8Mb Flash EEPROM with AMI® BIOS |
| BIOS Features | • Plug and Play (PnP) • SMBIOS 2.3 • DMI 2.3 • ACPI 2.0 / 1.0 • BIOS Rescue Hot Keys • USB Keyboard Support |
|
PC Health Monitoring
| |
|---|---|
| CPU | • Monitors CPU Core Voltages, +1.5V, +2.5V, +3.3V, +5V, ±12V, HyperTransport Link voltage 1.2V, memory voltage 2.5V, 3.3V Standby, VBAT |
| FAN | • Total up to 5-fan status tachometer monitoring • Up to five 3-pin fan headers |
| Temperature | • Monitoring for CPU and chassis environment • CPU Thermal Trip Support • I2C Temperature Sensing Logic |
| LED | • CPU / System Overheat LED • Suspend-State Indicator LED • +5V Standby Alert LED |
| Other Features | • Chassis Intrusion Header • Chassis Intrusion Detection |