Supermicro 1U Rackmount A+ Server AS-1011M-T2B
Key Features:
• Supports one Quad-Core AMD Opteron„¢ 1000 Processor
• Up to 8GB of memory
• 1 x PCI-E x16 Full-height / Half-length Slot
• Dual-port Gigabit LAN/Ethernet Controller
• 2 x Hot-swap SATA Drive Bays
• 260W Power Supply
Product SKU
| |
---|---|
AS-1011M-T2 | • A+ Server 1011M-T2 (Beige) |
AS-1011M-T2B | • A+ Server 1011M-T2B (Black) |
Motherboard
| |
---|---|
• Super H8SMi-2 |
Processor/Chipset
|
|
---|---|
CPU | • Single 940-pin ZIF Socket • Supports one Quad-Core AMD Opteron„¢ 1000 Series (Socket AM2/AM3) processor • 4 phase VRM |
System Bus | • 1000MHz HyperTransport |
Chipset | • nVidia MCP55 Pro |
System Memory
| |
---|---|
Memory Capacity | • Four 240-pin DIMM sockets • Supports up to 8 GB DDR2 800/667/533 MHz memory • Single or Dual (recommended) channel memory |
Memory Type | • DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | • 256 MB, 512 MB, 1GB, 2GB |
Memory Voltage | • 1.8V only |
On-Board Devices
| SATA | • nVidia MCP55 Pro SATA2 3.0Gbps Controller • 6 SATA Ports • nVidia RAID 2.0 • SATA RAID 0, 1 Support |
IDE | • Supports UDMA Mode 5 • Supports PIO Mode 4 • Supports ATA/100/133 |
IPMI | • Intelligent Platform Management Interface v.2.0 1U: (Optional: AOC-SIM1U(+) R 3.00) • RMM (Remote Management Module) • (Card not included) |
---|---|
Network Controllers | • nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
VGA | • ATI ES1000 graphics controller |
Super I/O |
• Winbond 83627HF |
Expansion Slots
| PCI-Express | • 1 x16 PCI-e slot |
---|
Input/Output
| SATA | • Up to six SATA2 devices | IDE | • Single ATA 133/100 EIDE channels support up to two UDMA IDE devices |
LAN | • 2 RJ45 LAN ports | USB | • 2 USB Rear Ports • 4 USB Internal Headers • 6 Total USB 2.0 Compliant, 1.1 Compatible |
VGA | • 1 VGA port |
---|---|
Keyboard/Mouse | • PS/2 keyboard and mouse ports |
Serial Ports | • 1 Fast UART 16550 serial ports • 1 Header |
Paralel Port |
• 1 ECP / EPP parallel port |
Chassis
| |
---|---|
Form Factor | • 1U Rackmount |
Model | • SC811FT-260 |
Dimension and Weight
| |
---|---|
Height | • 1.7" (43mm) |
Width | • 16.8" (426.7mm) |
Depth | • 22.6" (574mm) |
Gross Weight | • 35 lbs (15.9kg) |
Available Colors | • Beige, Black |
Front Panel
| |
---|---|
Buttons | • Power On/Off button |
LEDs | • Power LED |
Drive Bays
| |
---|---|
Hot-swap | • 2 x 3.5" SATA Hot-swap drive bays |
Peripheral Drives
| |
---|---|
CD-ROM | • Slim 24x CD-ROM drive |
Backplane
| |
---|---|
• 1x 1U SAS / ATA backplane |
System Cooling
| |
---|---|
Fans | • 2x 4cm counter-rotating fans |
Air Shroud |
• 1x Air duct |
Power Supply
| |
---|---|
Thermal control 260W AC power supply with PFC [ 24-pin, 4-pin=12V, (2) 4-pin ] | |
AC Voltage | • 100 - 240V, 60-50Hz, 4 Amp Max |
DC Output |
• 5V + 3.3V ‰¤ 140W |
+5V | • 25.0 Amp |
+5V standby | • 2.0 Amp |
+12V | • 18.0 Amp |
-12V | • 1.0 Amp |
Certification+3.3V | • 15.0 Amp |
PC Health Monitoring
| |
---|---|
CPU | • Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT |
FAN | • Total up to five 3-pin fan headers • 5 Fan Status Tachometer monitoring • Status Monitor for Speed Control |
Temperature | • Monitoring for CPU and chassis environment • CPU Thermal Trip support • I2C temperature sensing logic |
LED | •
CPU / Overheat LED • Suspend-state indicator LED • +5V Standby Alert LED |
Other Features | • Chassis Intrusion Header • Chassis Intrusion Detection • Chipkill Support |
System BIOS
| |
---|---|
BIOS Type |
• 4Mb Flash EEPROM with AMI® BIOS |
BIOS Features | • Plug and Play (PnP) • DMI 2.3 • PCI 2.2 • ACPI 2.0 • BIOS Rescue Hot Keys • SMBIOS 2.3 • USB Keyboard support • Hardware BIOS Virus Protection |