Supermicro 1U Rackkmount A+ Servers AS-1010P-TB
Key Features:
• Supports a single Dual-Core AMD Opteron„¢ 200 Series processor(s)
• Up to 16GB of memory
• Dual-port Gigabit ServerWorks
• 4 x 3.5" Hot-swap SATA Drive Bays
• 400W Power Supply
|
Product SKU
| |
|---|---|
| AS-1010P-T | • A+ Server 1010P-T (Beige) |
| AS-1010P-TB | • A+ Server 1010P-TB (Black) |
|
Motherboard
| |
|---|---|
| • Super H8SSP-i | |
| Processor/Chipset
|
|
|---|---|
| CPU | • Single 940-pin ZIF Sockets • Supports a single Dual-Core AMD Opteron„¢ 200 Series processor(s) • 1MB Cache • VRM x3 |
| Chipset | • ServerWorks HT2000 • ServerWorks HT1000 |
|
System Memory
| |
|---|---|
| Memory Capacity | • Four 184-pin DIMM sockets • Supports up to 8 GB DDR 400 MHz memory or • Supports up to 16 GB DDR 333 MHz memory or • Supports up to 16 GB DDR 266 MHz memory • Single or Dual (recommended) channel memory support |
| Memory Type | • DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
| DIMM Sizes | • 256 MB, 512 MB, 1GB, 2GB, 4GB** |
| Memory Voltage | • 2.5 V only |
| Error Detection | • Corrects single-bit errors |
|
On-Board Devices
| SATA | • 4 SATA Ports using ServerWorks HT1000 controller | IDE | • Supports UDMA Mode 5 • Supports PIO Mode 4 • Supports ATA/100 |
IPMI | • Intelligent Platform Management Interface v.2.0+ • (Optional: 1UIPMI-B ) 1U Support • (Optional: 1UIPMI-B + 1UIPMI-LANG) for 3rd LAN port support with IPMI • RMM (Remote Management Module) • (Card not included) |
|---|---|
| Network Controllers | • Broadcom BCM5704C Dual Gigabit Ethernet Controller • Supports 1000BASE-T, RJ45 output |
VGA | • ATI Rage XL 8MB PCI Graphics Controller • VGA Port |
| Super I/O | • NS PC87427 |
| Clock Generator |
• ICS932S801AG |
|
Expansion Slots
| Left Universal Slot | • 1 (x8) PCI-E slot
(Optional with Riser Card) OR • 1x 64-bit PCI-X 133MHz slot • Accommodates Full-height (maximum 11" length) add-on cards |
Right Universal Slot | • 1 (x8) PCI-E slot
(Optional with Riser Card) OR • 1x 64-bit PCI-X 100MHz slot • Low-profile slot |
IPMI | • IPMI 2.0 expansion slot |
|---|
|
Input/Output
| SATA | • Up to four SATA devices | IDE | • Single ATA 100 EIDE channels support up to two UDMA IDE devices • Supports UDMA Mode 5 • Supports ATA/100 |
Floppy | • 1 Floppy port; 1.44 MB | LAN | • 2 RJ45 LAN ports |
|---|---|
| USB | • 2 USB Rear Ports • 2 USB Internal Headers • USB 2.0 Compliant, 1.1 Compatible |
| Keyboard/Mouse | • PS/2 keyboard and mouse ports |
| Serial Ports | • 2 Fast UART 16550 serial ports • 1 Header |
|
Chassis
| |
|---|---|
| Form Factor | • 1U Rackmount |
| Model | • SC816T-400 |
|
Dimension and Weight
| |
|---|---|
| Height | • 1.7" (43mm) |
| Width | • 17.2" (437mm) |
| Depth | • 27" (686mm) |
| Gross Weight | • 46 lbs (20.9kg) |
| Available Colors | • Beige, Black |
|
Front Panel
| |
|---|---|
| Buttons | • Power On/Off button |
| LEDs |
• Power LED |
|
Drive Bays
| |
|---|---|
| Hot-swap | • 4 x 3.5" Hot-swap SATA drive bays |
|
Peripheral Drives
| |
|---|---|
| Floppy | • Slim Floppy Drive |
| DVD-ROM |
• Slim 8x DVD-ROM Drive |
|
SATA Backplane
| |
|---|---|
• 4-Port SATA Backplane |
|
|
System Cooling
| |
|---|---|
| Fans | • 3x 15000 RPM Dual Blade Fans |
|
Power Supply
| |
|---|---|
| 400W AC power supply with PFC | |
| AC Voltage | • 100 - 240V, 50-60Hz, 6A-3A Amp |
| +5V |
• 24 Amp |
| +5V standby | • 4 Amp |
| +12V | • 32 Amp |
| -12V | • 0.6 Amp |
| +3.3V | • 21 Amp |
|
PC Health Monitoring
| |
|---|---|
| CPU | • Monitors CPU Core Voltages, +5V, ±12V & +2.5V Standby, +2.5V Standby, VBAT. |
| FAN | • Total of up to 5 proprietary fan headers • 10 Tachometer monitoring • Status monitor for speed control • Status monitor for on/off control • Low-noise Fan Speed Control |
| Temperature | • Monitoring for CPU and chassis environment • CPU Thermal Trip support • PC temperature sensing logic |
| LED | • CPU / Overheat LED • Suspend-state indicator LED • +5V Standby alert LED |
| Other Features | • Chassis Intrusion Detection • Chassis Intrusion Header |
|
System BIOS
| |
|---|---|
| BIOS Type |
• 8Mb Flash EEPROM with AMI® BIOS |
| BIOS Features | • Plug and Play (PnP) • ACPI 2.0 • PCI 2.2 • DMI 2.3 • BIOS Rescue Hot Keys • SMBIOS 2.3 • USB Keyboard support |